Syltherm XLT Heat Transfer Fluid Dealers in Alappuzha, Syltherm XLT Heat Transfer Fluid Suppliers in Alappuzha

📄 Product Documentation

Syltherm XLT Heat Transfer Fluid Dealer in Alappuzha

Syltherm XLT Heat Transfer Fluid Technical Data Sheet Download PDF

Benefits

Highly stable
Long-lasting fluid
Low potential for fouling

Uses

Oil & gas
Pharmaceutical
Chemical processing

Technical Data Sheet

Property	SI Units	English Units
Color	-	Crystal-clear liquid
Viscosity at 25 °C (77 °F)	1.4 mPa·s	1.4 cP
Flash Point (Closed cup)	47 °C	116 °F
Flash Point (Open cup)	54 °C	130 °F
Autoignition Temp. (ASTM D-2155)	350 °C	662 °F
Acid Number, Typical	0.01	—
Freeze Point	-111 °C	-168 °F
Density at 25 °C (77 °F)	852 kg/m³	7.11 lb/gal
Specific Gravity at 25 °C (77 °F)	0.852	—
Heat of Combustion	32,800 kJ/kg	14,100 Btu/lb
Average Molecular Weight	—	4,100
Estimated Critical Temperature	327 °C	620 °F
Estimated Critical Pressure	12.16 bar	177 psia
Estimated Critical Volume	3.9 l/kg	0.063 ft³/lb

Description

SYLTHERMTM XLT heat transfer fluid is a specially formulated, high-performance silicone polymer designed for use as a low temperature, liquid-phase heat transfer medium. It offers outstanding low temperature heat transfer and pumpability, plus excellent thermal stability. SYLTHERM XLT fluid has essentially no odor, is low in acute oral toxicity, and is not listed as reportable under SARA Title III, section 313.††

Syltherm XLT Heat Transfer Fluid Safety Data Sheet Download PDF

Benefits

Highly stable
Long-lasting fluid
Low potential for fouling

Uses

Oil & gas
Pharmaceutical
Chemical processing

Safety Data Sheet

Property	Value
Physical State	Liquid
Color	Colourless
Odor	None
pH	Not applicable (non-polar/aprotic)
Boiling Point (760 mmHg)	> 190 °C
Flash Point	Tag closed cup 45.5 °C
Lower Explosion Limit	0.9 % vol
Upper Explosion Limit	13.75 % vol
Vapor Pressure	4 hPa
Relative Density (water = 1)	0.85
Auto-ignition Temperature	350 °C
Kinematic Viscosity	1.6 mm²/s
Explosive Properties	Not explosive
Oxidizing Properties	The substance or mixture is not classified as oxidizing