Welcome to Plustech Chem, innovation and excellence converge to redefine manufacturing solutions. Established in 2006, we've been at the forefront of pioneering chemical technologies that power industries worldwide.

Wacker 350 cst Silicone Fluid Manufacturer in Alwar

Wacker 350 cst Silicone Fluid Dealer in Alwar

Wacker 350 cst Silicone Fluid
Wacker 350 cst Silicone Fluid Dealer in Alwar
Wacker 350 cst Silicone Fluid Technical Data Sheet
Benefits
  • Medium-viscosity polydimethylsiloxane emulsion with good spreadability and ease of application.
  • Ultrafine particle size ensures smooth feel and uniform film formation.
  • Chemically inert and non-flammable under normal handling.
  • Contains corrosion inhibitor (sodium nitrite) for added protection during use.
Uses
  • Used in furniture polish formulations to provide shine and protective coating.
  • Applied in textile finishing to enhance softness and fabric feel.
  • Works as a mold release agent for rubber and plastic moulds when diluted.
  • Suitable for specialty coatings and surface treatment formulations that require silicone properties.
Technical Data Sheet
 
Property Condition Value
Emulsifier Type Nonionic
Solid Content 38 %
Appearance White
Centrifuge Test 1 h 2000 r/min
Dilution 200 ppm 30 d
Freeze Thaw Stability −20 – 20 °C 4 cycle(s)
Heat 7 d 50 °C
Viscosity, Kinematic of Silicone Fluid in Emulsion 350 cSt

 

How to Use

Dilute to about 0.5–2.5% in water-based systems for mold release applications. Always add a preservative when formulating water-based systems to prevent bacterial growth. For polishes and surface finishes, it can be used at higher concentrations or as supplied. It can also be blended with other silicone emulsions to balance gloss, durability, and ease of application.

Wacker 350 cst Silicone Fluid Safety Data Sheet
Benefits
  • Medium-viscosity polydimethylsiloxane emulsion with good spreadability and ease of application.
  • Ultrafine particle size ensures smooth feel and uniform film formation.
  • Chemically inert and non-flammable under normal handling.
  • Contains corrosion inhibitor (sodium nitrite) for added protection during use.
Uses
  • Used in furniture polish formulations to provide shine and protective coating.
  • Applied in textile finishing to enhance softness and fabric feel.
  • Works as a mold release agent for rubber and plastic moulds when diluted.
  • Suitable for specialty coatings and surface treatment formulations that require silicone properties.
Safety Data Sheet 
 
Property Value
Physical State Liquid
Colour White
Odour Slight
Melting Point Exempt
Boiling Point / Range 100 °C (212 °F)
Flash Point Not applicable
Ignition Temperature Not applicable
Lower Explosion Limit Exempt
Upper Explosion Limit Exempt
Vapour Pressure 22.664740 hPa
Density 0.99 g/cm³
Water Solubility Completely miscible
Viscosity (Dynamic) Not determined
Odour Threshold No data available
Percent Volatiles 60 %
Corrosive to Steel or Aluminum Not corrosive

 

How to Use

Dilute to about 0.5–2.5% in water-based systems for mold release applications. Always add a preservative when formulating water-based systems to prevent bacterial growth. For polishes and surface finishes, it can be used at higher concentrations or as supplied. It can also be blended with other silicone emulsions to balance gloss, durability, and ease of application.

Wacker 350 cst Silicone Fluid Regulatory Data Sheets

No Regulatory Data Sheets are available online for this material. Please Contact Us

Wacker 350 cst Silicone Fluid Sales Specification

No Sales Specification are available online for this material. Please Contact Us

Products Related to Wacker 350 cst Silicone Fluid