Dowcal 100 Heat Transfer Fluid Dealers in Haldwani, Dowcal 100 Heat Transfer Fluid Suppliers in Haldwani

📄 Product Documentation

Dowcal 100 Heat Transfer Fluid Dealer in Haldwani

Dowcal 100 Heat Transfer Fluid Technical Data Sheet Download PDF

Uses

Floor heating
Snow melting systems
Process heating
Heat recovery
Wind turbine systems
Photo-voltaic (PV) inverters
Ice skating rinks

Benefits

Improved corrosion protection, in particular for aluminum alloys
Hard water stability to enable use with local tap water
Compatible with commonly used elastomers
Long fluid lifetime, lowering maintenance cost
Recommended minimum 30% concentration for corrosion protection

Technical Specification

Parameter	Unit	Value	Test Method
Composition
Ethylene Glycol	% by weight	91%	—
Performance Additives & Water	% by weight	9%	—
Typical Properties
Colour	—	Colourless	—
Density at 20 °C	g/cm³	1.135	ASTM D4052
pH (50% vol. solution in demineralized water)	—	7.6 – 8.2	ASTM E70
Reserve Alkalinity (as concentrate)	mL	10.0 Min	ASTM D1121
Freezing Point (50% vol. solution in demineralized water)	°C	-38	ASTM E70

How to Use

DOWCAL™ 100 is an ethylene glycol-based heat transfer fluid for use in a wide range of industrial, construction, and infrastructure applications. It is highly recommended for heating applications.

Recommended use temperature range: -50°C to 175°C

Dowcal 100 Heat Transfer Fluid Safety Data Sheet Download PDF

Uses

Floor heating
Snow melting systems
Process heating
Heat recovery
Wind turbine systems
Photo-voltaic (PV) inverters
Ice skating rinks

Benefits

Improved corrosion protection, in particular for aluminum alloys
Hard water stability to enable use with local tap water
Compatible with commonly used elastomers
Long fluid lifetime, lowering maintenance cost
Recommended minimum 30% concentration for corrosion protection

Safety Data Sheet

Property	Value
Physical State	Liquid
Color	Variable
Odor	Characteristic
pH	7.6 – 8.2 (50% solution)
Melting Point/Range	-51 °C
Boiling Point (760 mmHg)	170 °C
Flash Point	Closed cup 120 °C / 760 mmHg
Evaporation Rate (Butyl Acetate = 1)	< 0.5
Flammability (liquids)	Not expected to be a static-accumulating flammable liquid
Lower Explosion Limit	3.2% v/v (Ethylene glycol)
Upper Explosion Limit	15.3% v/v (Ethylene glycol)
Vapor Pressure	3 mbar at 20 °C
Relative Vapor Density (air = 1)	1.04 – 1.134 at 20 °C
Relative Density (water = 1)	1.044 – 1.134 at 20 °C
Water Solubility	Completely miscible
Auto-Ignition Temperature	435 °C
Kinematic Viscosity	10–30 mm²/s at 20 °C

How to Use

DOWCAL™ 100 is an ethylene glycol-based heat transfer fluid for use in a wide range of industrial, construction, and infrastructure applications. It is highly recommended for heating applications.

Recommended use temperature range: -50°C to 175°C

Dowcal 100 Heat Transfer Fluid Regulatory Data Sheets

No Regulatory Data Sheets are available online for this material. Please Contact Us

Dowcal 100 Heat Transfer Fluid Sales Specification

No Sales Specification are available online for this material. Please Contact Us