Welcome to Plustech Chem, innovation and excellence converge to redefine manufacturing solutions. Established in 2006, we've been at the forefront of pioneering chemical technologies that power industries worldwide.
Xiameter PMX 200 Silicone Fluid 100 cst Technical Data Sheet
Download PDF
Benefit
Spreads easily on both skin and hair
De-soaping (prevents foaming during rubout) For industrial applications
High dielectric strength
High damping action
Oxidation-, chemical- and weather-resistant
Does not contain ingredients of animal origin (Suitable for Vegan)
No animal cross contamination
No porcine contamination
Uses
Active ingredient in a variety of automotive, furniture, metal and specialty polishes in paste, emulsion and solvent-based polishes and aerosols
Various applications including cosmetic ingredient, elastomer and plastics lubricant, electrical insulating fluid, foam preventive or breaker, mechanical fluid, mold release agent, surface active agent, and solvent-based finishing and fat liquoring of leather
Technical Data Sheet
Property
Unit
100 cSt
Appearance
—
Crystal clear
Specific Gravity at 25°C (77°F)
—
0.964
Refractive Index at 25°C (77°F)
—
1.4030
Color, APHA
—
5
Flash Point, Open Cup
°C (°F)
> 326 (620)
Acid Number, BCP
—
Trace
Melt Point
°C (°F)
-28 (-18)
Pour Point
°C (°F)
-65 (-85)
Surface Tension at 25°C (77°F)
dynes/cm
20.9
Volatile Content at 150°C (302°F)
percent
0.25
Viscosity Temperature Coefficient
—
0.60
Coefficient of Expansion
cc/cc/°C
0.00096
Thermal Conductivity at 50°C (122°F)
g cal/cm-sec-°C
0.00037
Solubility Parameter
—
7.4
Solubility in Typical Solvents — Chlorinated Solvents
—
High
Solubility in Typical Solvents — Aromatic Solvents
—
High
Solubility in Typical Solvents — Aliphatic Solvents
—
High
Solubility in Typical Solvents — Dry Alcohols
—
Poor
Solubility in Typical Solvents — Water
—
Poor
Solubility in Typical Solvents — Fluorinated Propellants
—
High
Dielectric Strength at 25°C (77°F)
volts/mil
400
Volume Resistivity at 25°C (77°F)
ohm-cm
1.0×10¹⁵
How to use
XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is highly soluble in organic solvents such as aliphatic and aromatic hydrocarbons, and the halocarbon propellants used in aerosols. The fluid is easily emulsified in water with standard emulsifiers and normal emulsification techniques. XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is insoluble in water and many organic products. Additive quantities as small as 0.1% may suffice where XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is to be used as a surface agent or for de-soaping creams and lotions. However, 1–10% is needed for applications such as hand creams and lotions to form a more uniform film and effective barrier.
Xiameter PMX 200 Silicone Fluid 100 cst Safety Data Sheet
Download PDF
Benefit
Spreads easily on both skin and hair
De-soaping (prevents foaming during rubout) For industrial applications
High dielectric strength
High damping action
Oxidation-, chemical- and weather-resistant
Does not contain ingredients of animal origin (Suitable for Vegan)
No animal cross contamination
No porcine contamination
Uses
Active ingredient in a variety of automotive, furniture, metal and specialty polishes in paste, emulsion and solvent-based polishes and aerosols
Various applications including cosmetic ingredient, elastomer and plastics lubricant, electrical insulating fluid, foam preventive or breaker, mechanical fluid, mold release agent, surface active agent, and solvent-based finishing and fat liquoring of leather
Safety Data Sheet
Property
Value
Physical State
Liquid
Color
Colourless
Odor
Characteristic
Boiling Point (760 mmHg)
Not applicable (Flash point used)
Flash Point
Closed cup > 326 °C
Flammability (liquids)
Ignitable (see flash point)
Relative Density (water = 1)
0.965
Kinematic Viscosity
100 cSt at 25 °C
Explosive Properties
Not explosive
Oxidizing Properties
The substance or mixture is not classified as oxidizing
How to use
XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is highly soluble in organic solvents such as aliphatic and aromatic hydrocarbons, and the halocarbon propellants used in aerosols. The fluid is easily emulsified in water with standard emulsifiers and normal emulsification techniques. XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is insoluble in water and many organic products. Additive quantities as small as 0.1% may suffice where XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is to be used as a surface agent or for de-soaping creams and lotions. However, 1–10% is needed for applications such as hand creams and lotions to form a more uniform film and effective barrier.
Xiameter PMX 200 Silicone Fluid 100 cst Regulatory Data Sheets
Download PDF
No Regulatory Data Sheets are available online for this material.
Please Contact
Us
De-soaping (prevents foaming during rubout) For industrial applications
High dielectric strength
High damping action
Oxidation-, chemical- and weather-resistant
Does not contain ingredients of animal origin (Suitable for Vegan)
No animal cross contamination
No porcine contamination
Uses
Active ingredient in a variety of automotive, furniture, metal and specialty polishes in paste, emulsion and solvent-based polishes and aerosols
Various applications including cosmetic ingredient, elastomer and plastics lubricant, electrical insulating fluid, foam preventive or breaker, mechanical fluid, mold release agent, surface active agent, and solvent-based finishing and fat liquoring of leather
Sales Specification
Property
Value / Limit
Unit
Method
Appearance (crystal clear liquid, free of suspended matter or sediment)
Pass
—
CTM0176
Viscosity (25 °C)
95.0 – 105.0
cSt
CTM0004
D4 Content
0.000 – 0.099
%
—
D5 Content
0.000 – 0.099
%
—
D6 Content
< 0.1
%
—
Volatile Content
≤ 0.50
%
—
Odor
PASS
—
—
How to use
XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is highly soluble in organic solvents such as aliphatic and aromatic hydrocarbons, and the halocarbon propellants used in aerosols. The fluid is easily emulsified in water with standard emulsifiers and normal emulsification techniques. XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is insoluble in water and many organic products. Additive quantities as small as 0.1% may suffice where XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is to be used as a surface agent or for de-soaping creams and lotions. However, 1–10% is needed for applications such as hand creams and lotions to form a more uniform film and effective barrier.
Benefit
Spreads easily on both skin and hair
De-soaping (prevents foaming during rubout) For industrial applications
High dielectric strength
High damping action
Oxidation-, chemical- and weather-resistant
Does not contain ingredients of animal origin (Suitable for Vegan)
No animal cross contamination
No porcine contamination
Uses
Active ingredient in a variety of automotive, furniture, metal and specialty polishes in paste, emulsion and solvent-based polishes and aerosols
Various applications including cosmetic ingredient, elastomer and plastics lubricant, electrical insulating fluid, foam preventive or breaker, mechanical fluid, mold release agent, surface active agent, and solvent-based finishing and fat liquoring of leather
Sales Specification
Property
Value / Limit
Unit
Method
Appearance (crystal clear liquid, free of suspended matter or sediment)
Pass
—
CTM0176
Viscosity (25 °C)
95.0 – 105.0
cSt
CTM0004
D4 Content
0.000 – 0.099
%
—
D5 Content
0.000 – 0.099
%
—
D6 Content
< 0.1
%
—
Volatile Content
≤ 0.50
%
—
Odor
PASS
—
—
How to use
XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is highly soluble in organic solvents such as aliphatic and aromatic hydrocarbons, and the halocarbon propellants used in aerosols. The fluid is easily emulsified in water with standard emulsifiers and normal emulsification techniques. XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is insoluble in water and many organic products. Additive quantities as small as 0.1% may suffice where XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is to be used as a surface agent or for de-soaping creams and lotions. However, 1–10% is needed for applications such as hand creams and lotions to form a more uniform film and effective barrier.
Products Related to Xiameter PMX 200 Silicone Fluid 100 cst
