Welcome to Plustech Chem, innovation and excellence converge to redefine manufacturing solutions. Established in 2006, we've been at the forefront of pioneering chemical technologies that power industries worldwide.
Xiameter PMX 200 Silicone Fluid 50 cst Technical Data Sheet
Download PDF
Benefits
Ease of application and rubout
Ease of buffing
Enhances color
High water repellency
High compressibility
High shearability without breakdown
High spreadability and compatibility
Low environmental hazard
Low fire hazard
Low reactivity and vapor pressure
Low surface energy
Good heat stability
Essentially odorless, tasteless and nontoxic
Soluble in a wide range of solvents
Does not contain ingredients of animal origin (Suitable for Vegan)
Non-GMO
No animal cross contamination
No porcine contamination
Uses
Active ingredient in a variety of automotive, furniture, metal and specialty polishes in paste, emulsion and solvent-based polishes and aerosols
Various applications including cosmetic ingredient, elastomer and plastics lubricant, electrical insulating fluid, foam preventive or breaker, mechanical fluid, mold release agent, surface active agent, and solvent-based finishing and fat liquoring of leather 3
Technical Data sheet
Properties by Viscosity Grade
Property
Unit
50 cSt
Appearance
—
Crystal clear
Specific Gravity at 25°C (77°F)
—
0.960
Refractive Index at 25°C (77°F)
—
1.4022
Color, APHA
—
5
Flash Point, Open Cup
°C (°F)
318 (605)
Acid Number, BCP
—
Trace
Melt Point
°C (°F)
-41 (-42)
Pour Point
°C (°F)
-70 (-94)
Surface Tension at 25°C (77°F)
dynes/cm
20.8
Volatile Content at 150°C (302°F)
percent
0.35
Viscosity Temperature Coefficient
—
0.59
Coefficient of Expansion
cc/cc/°C
0.001004
Thermal Conductivity at 50°C (122°F)
g cal/cm-sec-°C
0.00037
Solubility Parameter
—
7.3
Solubility in Typical Solvents — Chlorinated Solvents
—
High
Solubility in Typical Solvents — Aromatic Solvents
—
High
Solubility in Typical Solvents — Aliphatic Solvents
—
High
Solubility in Typical Solvents — Dry Alcohols
—
Poor
Solubility in Typical Solvents — Water
—
Poor
Solubility in Typical Solvents — Fluorinated Propellants
—
High
Dielectric Strength at 25°C (77°F)
volts/mil
400
Volume Resistivity at 25°C (77°F)
ohm-cm
1.0×10¹⁵
How to use
XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is highly soluble in organic solvents such as aliphatic and aromatic hydrocarbons, and the halocarbon propellants used in aerosols. The fluid is easily emulsified in water with standard emulsifiers and normal emulsification techniques. XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is insoluble in water and many organic products. Additive quantities as small as 0.1% may suffice where XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is to be used as a surface agent or for de-soaping creams and lotions. However, 1–10% is needed for applications such as hand creams and lotions to form a more uniform film and effective barrier.
Xiameter PMX 200 Silicone Fluid 50 cst Safety Data Sheet
Download PDF
Benefits
Ease of application and rubout
Ease of buffing
Enhances color
High water repellency
High compressibility
High shearability without breakdown
High spreadability and compatibility
Low environmental hazard
Low fire hazard
Low reactivity and vapor pressure
Low surface energy
Good heat stability
Essentially odorless, tasteless and nontoxic
Soluble in a wide range of solvents
Does not contain ingredients of animal origin (Suitable for Vegan)
Non-GMO
No animal cross contamination
No porcine contamination
Uses
Active ingredient in a variety of automotive, furniture, metal and specialty polishes in paste, emulsion and solvent-based polishes and aerosols
Various applications including cosmetic ingredient, elastomer and plastics lubricant, electrical insulating fluid, foam preventive or breaker, mechanical fluid, mold release agent, surface active agent, and solvent-based finishing and fat liquoring of leather 3
Safety Data
Property
Value
Physical State
Liquid
Color
Colourless
Odor
Characteristic
Boiling Point (760 mmHg)
> 65 °C
Flash Point
Closed cup > 120 °C
Flammability (solid, gas)
Not applicable
Flammability (liquids)
Ignitable (see flash point)
Relative Density (water = 1)
0.96
Kinematic Viscosity
50 cSt at 25 °C
Explosive Properties
Not explosive
Oxidizing Properties
The substance or mixture is not classified as oxidizing
How to use
XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is highly soluble in organic solvents such as aliphatic and aromatic hydrocarbons, and the halocarbon propellants used in aerosols. The fluid is easily emulsified in water with standard emulsifiers and normal emulsification techniques. XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is insoluble in water and many organic products. Additive quantities as small as 0.1% may suffice where XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is to be used as a surface agent or for de-soaping creams and lotions. However, 1–10% is needed for applications such as hand creams and lotions to form a more uniform film and effective barrier.
Xiameter PMX 200 Silicone Fluid 50 cst Regulatory Data Sheets
Download PDF
No Regulatory Data Sheets are available online for this material.
Please Contact
Us
Does not contain ingredients of animal origin (Suitable for Vegan)
Non-GMO
No animal cross contamination
No porcine contamination
Uses
Active ingredient in a variety of automotive, furniture, metal and specialty polishes in paste, emulsion and solvent-based polishes and aerosols
Various applications including cosmetic ingredient, elastomer and plastics lubricant, electrical insulating fluid, foam preventive or breaker, mechanical fluid, mold release agent, surface active agent, and solvent-based finishing and fat liquoring of leather 3
Sales Specification
Parameter
Value
Shelf Life
1,080 Days
Container Type
All Approved Packaging
Appearance
Crystal clear liquid, free of suspended matter or sediment
Viscosity (Capillary, 25 °C)
47.50 – 52.50 cSt
Acid Number
0.0000 – 0.0100 mg KOH/g
Refractive Index (25 °C)
1.4010 – 1.4030
Specific Gravity (25 °C/15.6 °C)
0.957 – 0.963
Color (APHA)
≤ 5
Flash Point
≥ 545 °F
Volatile Content
0.00 – 0.50 %
D4 Content
0.000 – 0.099 %
D5 Content
0.000 – 0.099 %
D6 Content
< 0.1 %
How to use
XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is highly soluble in organic solvents such as aliphatic and aromatic hydrocarbons, and the halocarbon propellants used in aerosols. The fluid is easily emulsified in water with standard emulsifiers and normal emulsification techniques. XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is insoluble in water and many organic products. Additive quantities as small as 0.1% may suffice where XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is to be used as a surface agent or for de-soaping creams and lotions. However, 1–10% is needed for applications such as hand creams and lotions to form a more uniform film and effective barrier.
Benefits
Ease of application and rubout
Ease of buffing
Enhances color
High water repellency
High compressibility
High shearability without breakdown
High spreadability and compatibility
Low environmental hazard
Low fire hazard
Low reactivity and vapor pressure
Low surface energy
Good heat stability
Essentially odorless, tasteless and nontoxic
Soluble in a wide range of solvents
Does not contain ingredients of animal origin (Suitable for Vegan)
Non-GMO
No animal cross contamination
No porcine contamination
Uses
Active ingredient in a variety of automotive, furniture, metal and specialty polishes in paste, emulsion and solvent-based polishes and aerosols
Various applications including cosmetic ingredient, elastomer and plastics lubricant, electrical insulating fluid, foam preventive or breaker, mechanical fluid, mold release agent, surface active agent, and solvent-based finishing and fat liquoring of leather 3
Sales Specification
Parameter
Value
Shelf Life
1,080 Days
Container Type
All Approved Packaging
Appearance
Crystal clear liquid, free of suspended matter or sediment
Viscosity (Capillary, 25 °C)
47.50 – 52.50 cSt
Acid Number
0.0000 – 0.0100 mg KOH/g
Refractive Index (25 °C)
1.4010 – 1.4030
Specific Gravity (25 °C/15.6 °C)
0.957 – 0.963
Color (APHA)
≤ 5
Flash Point
≥ 545 °F
Volatile Content
0.00 – 0.50 %
D4 Content
0.000 – 0.099 %
D5 Content
0.000 – 0.099 %
D6 Content
< 0.1 %
How to use
XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is highly soluble in organic solvents such as aliphatic and aromatic hydrocarbons, and the halocarbon propellants used in aerosols. The fluid is easily emulsified in water with standard emulsifiers and normal emulsification techniques. XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is insoluble in water and many organic products. Additive quantities as small as 0.1% may suffice where XIAMETER™ PMX-200 Silicone Fluid, 50–1,000 cSt is to be used as a surface agent or for de-soaping creams and lotions. However, 1–10% is needed for applications such as hand creams and lotions to form a more uniform film and effective barrier.
Products Related to Xiameter PMX 200 Silicone Fluid 50 cst
